Introduction to Comprehensive Testing Laboratory Equipment:

1. AC Contactor Temperature Rise Test Station

Capacity: 60KVA; capable of reaching currents up to 3150A during contactor temperature rise tests. Computer-controlled with constant current output. Temperature measurement conducted using a multi-channel temperature tester, with temperature rise curves automatically generated by the computer.

2. AC/DC Contactor Comprehensive Test Station

Capacity: 12KVA; capable of reaching currents up to 800A during AC contactor temperature rise tests. Computer-controlled with constant current output. Temperature measurement conducted using a multi-channel temperature tester, with temperature rise curves automatically generated by the computer.

For mechanical life testing of AC contactors, with an output power of 20KVA and a digital counter with power-off memory. It features intelligent detection of contactor contact closure and opening. In intermittent cycle tests, if the contactor fails to engage or release slowly, the test will automatically stop and record the current number of test cycles.

3. Adjustable DC Voltage Regulator

Provides DC power supply for testing purposes, mainly used in electronic circuit testing.

4. High-Precision Fully Automatic AC Voltage Regulator

Provides stable AC power supply during testing.

5. Single-Phase Variable Frequency Power Supply

Primarily used for testing the operational characteristics of coils in 60Hz AC contactor products.

6. Dielectric Strength Tester

Mainly used for testing the dielectric performance of AC contactors.

7. Inter-turn Impulse Voltage Tester

Mainly used for testing the inter-turn insulation withstand voltage of coils.

8. Transistor Characteristics Display Instrument

Tests the characteristic curves of diodes and other transistors.

9. DC Parameters Meter for Varistors

Measures the characteristics of varistors.

10. High-Precision Coil Turns Counter

Used for measuring coil turns, with intelligent judgment of whether they are qualified. Can also display inter-turn short circuit conditions.

11. Salt Spray Test Machine

Used to test the corrosion resistance of electroplated coatings on metal surfaces under salt spray conditions.

12. Microcomputer Multi-Functional Electrolytic Thickness Gauge

Used for measuring the thickness of metal electroplated coatings.

13. Spring Tension Tester

Used for measuring the force during spring tension or compression.

14. Rockwell Hardness Tester

Used for measuring the Rockwell hardness of metal parts.

15. Shore Hardness Tester

Used for measuring the Shore hardness of rubber parts.

16. DC Resistance Bridge

Used for precise resistance measurements.

17. Digital Micro Ohmmeter

Used for measuring microresistance such as contact resistance.

18. Digital Megohmmeter

Used for measuring insulation resistance.

19. Iron Core Air Gap and Flatness Measurement Device

Used for measuring the air gap and flatness of iron core components.

20. Surface Roughness Comparison Specimens

Used for comparing the surface roughness of iron core components.

21. Granite Platform

Used as a reference platform for measurements.

22. Vernier Height Caliper

Used for measuring height and marking lines.

23. Vernier Caliper (0~300mm, 0~150mm)

Used for measuring length, outer diameter, and other dimensions.

24. External Diameter Micrometer

Used for measuring small outer diameters such as enamel wires.

25. Ruler Gauge

Used for comparing the size of arcs.

26. Dial Torque Wrench

Used for tightening and loosening bolts to a specific torque.

27. Thread Plug Gauge, Thread Ring Gauge

Used for checking the pass or stop condition of screws and nuts.

28. Clamp Ammeter

Used for measuring current and voltage.

29. Digital Multimeter

Used for measuring current, voltage, resistance, etc.

30. 0.5-Class Digital DC Voltmeter, 0.5-Class Digital DC Ammeter

Used for high-precision measurements of DC voltage and current.

31. Pointer AC/DC Voltmeter, Pointer AC/DC Ammeter

Used for measuring voltage and current.